TLV62569DBVR 原装 DC DC 开关稳压器 的技术参数：
类别 | 集成电路（IC） PMIC - 稳压器 - DC DC 开关稳压器 |
制造商 | Texas Instruments |
功能 | 降压 |
输出配置 | 正 |
拓扑 | 降压 |
输出类型 | 可调式 |
电压 - 输入（min） | 2.5V |
电压 - 输入（max） | 5.5V |
电压 - 输出（min/固定） | 0.6V |
电压 - 输出（max） | 5.5V |
电流 - 输出 | 2A |
频率 - 开关 | 1.5MHz |
同步整流器 | 是 |
工作温度 | -40°C ~ 125°C（TJ） |
安装类型 | 表面贴装型 |
封装/外壳 | SC-74A，SOT-753 |
公司原装现货优势出：
KLMBG2JETD-B041 10K 22+
KLMAG1JETD-B041 10K 22+
KLM8G1GETF-B041 10K 22+
KLM4G1FETE-B041 10K 22+
K4E8E324EB-EGCF 10K 22+
K4E6E304EB-EGCF 10K 22+
K4E6E304EC-EGCG 10K 22+
K4B4G1646E-BCNB 10K 22+
K4A8G165WB-BCRC 10K 22+
TLC59116IPWR 原装 LED驱动器 的，描述：
The TLC59116 is an I2C bus controlled 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) color mixing and backlight application. Each LED output has its own 8-bit resolution (256 steps) fixed-frequency individual PWM controller that operates at 97 kHz, with a duty cycle that is adjustable from 0% to 99.6%.
The individual PWM controller allows each LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds, with a duty cycle that is adjustable from 0% to 99.6%. The group PWM controller dims or blinks all LEDs with the same value.
Each LED output can be off, on (no PWM control), or set at its individual PWM controller value at both individual and group PWM controller values.
The TLC59116 operates with a supply voltage range of 3 V to 5.5 V and the outputs are 17 V tolerant. LEDs can be directly connected to the TLC59116 device outputs.
Software programmable LED Group and three Sub Call I2C-bus addresses allow all or defined groups of TLC59116 devices to respond to a common I2C-bus address, allowing for example, all the same color LEDs to be turned on or off at the same time or marquee chasing effect, thus minimizing I2C-bus commands.
Four hardware address pins allow up to 14 devices on the same bus.
The Software Reset (SWRST) Call allows the master to perform a reset of the TLC59116 through the I2C-bus, identical to the Power-On Reset (POR) that initializes the registers to their default state causing the outputs to be set high (LED off). This allows an easy and quick way to reconfigure all device registers to the same condition.
询价
